Joint Zone JZ-40TPS 4" Steel Submersible Hydraulic Trash Pump w/ Couplers

Description

***INCLUDES COUPLERS***
Purchase through our company website,
RENTAL TOOLS ONLINE
, and receive
FREE SHIPPING!!
Search product code 141431.
The Joint Zone JZ-40TPS hydraulic pump can be compared to the Stanley TP08013 unit.
This submersible centrifugal design requires no priming and can run dry all day without damage. Great for dredge operations. Direct drive requires no maintenance as all moving parts are self lubricated with passing. The JZ-40TPS has a 316 Stainless Steel Volute and Impeller as well as an anodized Motor Mount and Wear Plate. It is a compact submersible trash pump and is a light weight, efficient way to move large volumes of liquids that can contain sand, dirt and gravel very quickly. Pump can handle the removal of water containing solids up to 30%. It is perfect in the pumping sites of water, sand slurries, gravel and sludge on job sites.
PUMPING CAPACITY
875 gpm (3312 lpm)
MAX GPH
52500
Max TDH
45 Ft
PUMP TYPE
Trash-Sludge-Slurry-Water
CONSTRUCTION
Steel Fabrication/Steel Impeller
DISCHARGE
4” Cam Loc - 3” NPT Male
WEIGHT
59 lbs. (26.8 kg)
LENGTH
19 inches (482 mm)
WIDTH
15 inches (381 mm)
HEIGHT
19 inches (482 mm)
HYDRAULIC FLOW RANGE
7-11 gpm (26-41 lpm)
MAXIMUM PRESSURE
2000 psi (138 bar)
MAXIMUM BACK PRESSURE
250 psi (17 bar)
WARRANTY
- Submersible Pumps and their associated parts are warranted against defects in material and workmanship for a period of twelve months from the date of purchase. Repair or replacement of defective parts will be approved by manufacturer. This warranty becomes void if maximum pressures or flows are exceeded. Back pressure should be measured at the tool before being used. Excessive back pressure will damage shaft seal.
ALL SHIPMENTS REQUIRE A SIGNATURE