Hangsterfers Clean All: 1 gallon

Description

Clean All Aqueous Cleaning Concentrate FEATURES  Biodegradable  Low Foam  Excellent Corrosion Control  Non-Hazardous  Excellent for High Pressure Systems  Non-Toxic  High Pressure Capable to 2000 psi  Rust and Corrosion Inhibitors GENERAL DESCRIPTION Hangsterfer's Clean All is designed for dilution with water for various cleaning applications. Clean All has a three component cleaning technology, which consists of oil soluble detergents, water soluble detergents and emulsifiers. These components quickly remove dirt, oil, grease and other residues. Clean All's neutral pH minimizes the risk of staining or tarnishing on parts or machine components. In addition, it contains corrosion and rust inhibitors, which allow for maximum protection of metal surfaces. Clean All is engineered to be low foaming while still producing a high cleaning action in many areas where other inferior technologies cannot be used, including high temperature applications. Clean All’s unique chemistry can meet many of the most difficult technical cleaning requirements for the most difficult applications. Because of Clean All's high solvent action, spot testing should be conducted on materials before use. APPLICATIONS Automated Floor Cleaning Hot Dip Tanks Cleaning Machine Tool Flushing, Cleanout High-Agitation Systems Parts Washer High-Temperature Applications Ultrasonic Tanks MATERIALS Primary Secondary Aluminum Stainless Steel Tin Plastic Iron, Cast Iron, Ductile Steel Zinc INSTRUCTIONS Clean All should be mixed at 5% to 10% for effective machine sump/ system cleaning. Do Not Add Clean All To Your Existing Coolant. Drain coolant sump and add mixed Clean All to your sump system at the desired concentration. Add sufficient Clean All solution so that the pumps will prime and feed the total coolant system. Recirculation time should be a minimum of 30 minutes. Use auxiliary spray hose to wash down inside of machine center cabinet. A spray and wipe technique may be used for exterior surfaces close to control board and other sensitive areas. Never spray Clean All directly onto electrical controls, etc. Pump out Clean All and rinse system with water or a weak dilution of the coolant. Recharge system with mixed Hangsterfer's coolant at the correct concentration.